Fuel Stop Solenoid 1A02160010 1A02160015 for Kubota V2003 V2203 V2403 D1503

Product Overview

This fuel stop solenoid shuts off fuel flow to the injection pump on Kubota diesel engines such as the V2003, V2203, V2403, and D1503. It is an electromechanical device that engages when the ignition is turned off, preventing engine run-on. Ideal for replacing a failed solenoid that causes hard starting or no-start conditions on tractors, generators, and industrial equipment.

Key Features & Performance

• Direct replacement for OEM part numbers 1A021-60010 and 1A021-60015
• 12V DC operation with standard two-wire connector
• Built with a robust plunger and spring for reliable shut-off action
• Sealed housing resists fuel, moisture, and vibration
• Pre-tested for proper solenoid stroke and pull-in current

Fitment & Compatibility

• Kubota V2003 engine
• Kubota V2203 engine
• Kubota V2403 engine
• Kubota D1503 engine

Common Uses

• Replacing a faulty fuel stop solenoid on Kubota diesel engines in agricultural tractors
• Servicing Kubota-powered generators and construction equipment
• Repairing no-start or hard-start issues caused by a stuck or burned-out solenoid
• Restoring proper engine shut-down function on industrial machinery

Technical Specifications

• Part Number(s): 1A021-60010, 1A021-60015
• Voltage: 12V DC
• Body Diameter: 30 mm (approx.)
• Mounting Holes: 2 x M5 (approx.)

Frequently Asked Questions

Q: Will this solenoid work with a 24V system? A: No, this solenoid is designed for 12V DC systems only; using it on 24V may cause immediate failure.

Q: How do I test if my old solenoid is bad? A: Apply 12V power directly to the solenoid terminals; if the plunger does not retract with a clear click, the solenoid is likely defective and should be replaced.

Product appearance and specifications may vary slightly by batch. Compatibility may vary by serial number. Verify fitment before purchase.